Ramseytest STE3300F2 RF skjermet testkabinett

STE3300F2 FORENSIC RF SHIELDED TEST ENCLOSURE

• The perfect isolation chamber for continued powered-up storage of wireless devices 
• Designed specifically for forensics applications 
• Provides maximum isolation from all UMTS mobile device bands 
• Provides maximum isolation from WiFi signal sources including 802.11a/b/g/n/ac 
• Features the latest GEN-2 custom RF gasket system 
• Features the latest GEN-2 custom RF absorbent and reflective foam liner 
• Built-in RF filtered AC power strip 
• High speed USB2.0 data interface 
• Forensics tamper-proof hardware and a dual padlockable latches prohibits unauthorized access and maintains the chain of custody 
• Universal removable I/O panel customizable for your specific applications

The STE3300F2 is designed specifically for storing multiple wireless  devices in their powered-on state while keeping them isolated from the  network carrier.  Its larger size makes it ideal for extended storage of  department confiscated devices both before and after the forensics  examination for what could be an extended period of time.

Let's follow a typical forensics time line.

  1. A suspect wireless device is confiscated on-site.  To protect it from  real-time on-line executable booby traps (remote kill commands, remote  lock commands, remote self-destruct commands, etc.) as well as device  GPS tracing back to your location, the device needs to be immediately  isolated from the carrier's network.  It also needs to be isolated from  any available WiFi source.  That can be easily accomplished with the use  of our STE2200F2 forensics enclosure or STP1300 series forensics pouch.

2. Once the wireless device has reached your lab, it needs to be made  ready for your forensics examination.  However, the device still needs  to be totally isolated from the carrier's network and WiFi sources.  But  now the device needs to remain powered up to eliminate the liability of  a very possible power-down lockout, power-down self-destruct script, or  other power-down loss of integrity.  Therefore, the device needs to be  plugged into a charger to maintain its powered-up status.  If a  forensics interrogation is scheduled soon, the device can be transferred  to, and plugged into a charger in our STE3000F2 series RF Test  Enclosures.  If the interrogation cannot be scheduled soon, and the  device needs to be stored, it can be transferred into our STE3300F2 RF  Test Enclosure, and connected to a charger to maintain its powered-up  state until an interrogation can be scheduled.  

3. Whenever the interrogation is completed, if the device is to remain  in custody, it can be transferred into our STE3300F2 enclosure,  connected to a charger to maintain its powered-up status, and can be  stored until further needed.  At no time during this time line, was the  wireless device exposed to the carrier's network, a WiFi source, and was  never in jeopardy of being blocked, locked out, or otherwise  compromised by a network received or powered-down script.

Enclosure wise, the STE3300F2 is a twin to our STE3000F2 and  STE3000FAV2, without the visual and hands-on capabilities, and without  the video/audio recording system.  It is designed to provide you ample  room for multiple device storage, while keeping them in a powered-on  state for as required.  Like its twins, it comes standard with a  6-outlet 110VAC outlet strip to accommodate any combination of device  chargers and multiple port USB based device chargers.  Six of our  optional 4-port USB chargers can be easily plugged in to charge 24  various formatted wireless devices!  Also like its twins, a USB2.0 high  speed interface is also provided as standard equipment with the  STE3300F2.  This gives you a fully RF isolated I/O at full 480mbps  USB2.0 speed to interconnect with any device inside the enclosure.  This  is perfect for connecting a suspect device, already in your possession,  to your forensics software tools for further investigation and data  dumps, all of which can be done without relocating the device in  question.

The RF filtered AC power interface as well as the USB2.0 interface are  located on the spacious universal removable I/O panel.  This leaves  plenty of room for a host of other I/O options that you may need to suit  your specific test applications.  From international power options to  virtually every data and RF interconnect, we have the option available  that you require.

The STE3300F2 is designed around the same heavy duty, rugged .090" and  .125" aluminum design of its STE3000F2 series twins.  New for 2014 it  also features our custom engineered GEN-2 RF gaskets.  With over a year  in the R&D lab, these new gaskets provide a previously unheard of  and flawless RF seal while being immune to the fixed compression set of  typical stainless gaskets.  Likewise, also new for 2014 the STE3300F2  also features our GEN-2 RF absorbent and reflective foam lining.   This foam was designed from the ground up, to our demanding  specifications to provide maximum performance over all operating  frequencies and bands.   Therefore, you can be confident that any device  in your possession will remain totally isolated from the carrier's  network, regardless of the carrier, make or model, operating system, or  the frequency bands used.  Likewise, the device will also remain fully  isolated from any WiFi signal sources, including both 2.4 GHz and 5.0  GHz, and therefore covering any combination of 802.11a/b/g/n/ac  protocols.

Like all of our forensics units, tamper-proof hardware and dual  padlockable latches are designed into the STE3300F2 to prohibit  unauthorized access and maintain the chain of custody for the devices  collected and stored.   If you or your department is looking for a  secure RF isolated storage chamber for your confiscated wireless  devices, check out the STE3300F2.

 Features:

• Designed for WLAN testing 
• Top loading swing away door 
• Exclusive double lip RF tight gasket
• Universal I/O connector interface plate 
• Insertion Loss RF absorbent foam liner Standard
• Reflection Loss solutions available
• Optional security locking latch available

Isolation:

(Base Enclosure, may vary depending on I/O or options selected in final configuration):

• >95dB  To 3GHz 
• >90dB  To 6GHz 

I/O Connectors:

• None provided standard, customized to your specific requirements.
• See options for off the shelf connectors/interfaces available.
• Coaxial connectors: SMA, BNC, TNC, N, N to SMA, etc..
• Digital interfaces: USB, Ethernet, Video, Serial, Audio, Fiber, etc..
• Power filter interface: AC and DC 
• Power Strip Options: US, UK, European, France, Swiss, Italy, Israel, India, China, Australia, Multi Country Config, etc…
• Custom connection options can be sourced through our Engineering Team.   

Dimensions/Weight:

Includes 3/4" Foam (Base Enclosure, may vary depending on I/O or options selected in final configuration) :